Oil & Gas Wellhead Wireline Pressure Control Equipment Assembly /
WPCE
Wellhead Wireline Pressure Control Equipment is used for testing
and paraffin treatment in flowing oil well, gas well, water
injection well and coalbed methane testing. The unit supplies
buffer and transitional area for string running with pressure to
hole, could satisfy the wellhead seal requirement and there is no
overflow. Simple operating, safe and reliable function. Working
pressure is 10MPa, 21MPa, 35MPa, 70MPa and 105MPa. Standard ID is
30mm, 52mm, 62mm(65mm), 76mm(78mm), 89mm, 102mm(103mm), 120mm,
140mm, 160mm and 180mm. Our factory has the ability to design
products to adapt to different environment according to clients '
requirements.
The whole Wellhead Wireline Pressure Control Equipment is composed
of Grease Injection Control Head, Top Catcher, Lubricator, Bottom
Catcher (include testing blowout assy), BOP, Pump-in Tee, Up
sheave, Down sheave, Crossover Flange, Quick testing Assly, all
kinds of pipes and other components which necessary.
Technical parameter of Wellhead Wireline Pressure Control Equipment
| Model | DLFP3-10 | DLFP3-21 | DLFP5-21 | DLFP6-35 | DLFP7-35 | DLFP8-35 | DLFP10-35 |
| Working Pressure Mpa | 10 | 21 | 21 | 35 | 35 | 35 | 35 |
| Lubricator ID mm | 32 | 32 | 52 | 62(65) | 76(78) | 89 | 102(103) |
| Cable ID mm | 5.6mm/8mm/11.8mm/12.7mm |
| Sealing Mode | Grease Injection sealing + rubber element sealing+stuffing |
| Service | Water, Crude oil, Natural gas with H2S and CO2 |
| Working Temperature | T-20(-29oC~+121oC) |
| Model | DLFP12-35 | DLFP16-35 | DLFP18-35 | DLFP22-35 | DLFP6-70 | DLFP7-70 | DLFP8-70 |
| Working Pressure Mpa | 35 | 35 | 35 | 35 | 70 | 70 | 70 |
| Lubricator ID mm | 120 | 140 | 160 | 180 | 220 | 62(65) | 76(78) |
| Cable ID mm | 5.6mm/8mm/11.8mm/12.7mm |
| Sealing Mode | Grease Injection sealing + rubber element sealing+stuffing |
| Service | Water, Crude oil, Natural gas with H2S and CO2 |
| Working Temperature | T-20(-29oC~+121oC) |
| Model | DLFP10-70 | DLFP12-70 | DLFP14-70 | DLFP16-70 | DLFP18-70 | DLFP7-105 | DLFP12-105 |
| Working Pressure Mpa | 70 | 70 | 70 | 70 | 70 | 105 | 105 |
| Lubricator ID mm | 102(103) | 120 | 140 | 160 | 180 | 76(78) | 120 |
| Cable ID mm | 5.6mm/8mm/11.8mm/12.7mm |
| Sealing Mode | Grease Injection sealing + rubber element sealing+stuffing |
| Service | Water, Crude oil, Natural gas with H2S and CO2 |
| Working Temperature | T-20(-29oC~+121oC) |
| Model | DLFP12-35 | DLFP16-35 | DLFP18-35 | DLFP22-35 | DLFP6-70 | DLFP7-70 | DLFP8-70 |
| Working Pressure Mpa | 35 | 35 | 35 | 35 | 70 | 70 | 70 |
| Lubricator ID mm | 120 | 140 | 160 | 180 | 220 | 62(65) | 76(78) |
| Cable ID mm | 5.6mm/8mm/11.8mm/12.7mm |
| Sealing Mode | Grease Injection sealing + rubber element sealing+stuffing |
| Service | Water, Crude oil, Natural gas with H2S and CO2 |
| Working Temperature | T-20(-29oC~+121oC) |
